The sodium Lignosulphonate is fit for apply to building project, dam project, thruway project etc. Nearly no precipitate product in the liquor additive which is made from The sodium lignosulphonate and Naphthalin-Group High-Efficiency Water Reducer .
Sodium Lignosulphonate ( lignosulfonate ) water reducer are mainly for concrete mixture as water-reducing additive. Can confected as concrete early-age strength enhancer , concrete retarder , antifreeze , pumping aids etc.Low dosage , low air content , water reducing rate is high ,adapt to most kind of cement.
Sodium lignosulfonate is mainly used in concrete producing and ceramic product producing.
it used to increasing concrete strength,adjust concrete setting time.
in ceramic product producing,sodium lignosulfonate is mainly used to increase strength of ceramic green body.
as this usage,dosage is usually around 0.1%-0.3%.
of course,it can also be used printing and dyeing chemical.oil field chemical,etc.
Name: Sodium Lignosulphonate
CAS No. :8061-51-6
Experimental application of modified sodium ligninsulphonate series products of ceramic slurry, results showed that lignosulphonate has a better dispersion stability. For ceramics lignosulphonate can reduce the carbon content ,reduce the amount of plastic clay ,mud ,good liquidity,increase yield 70%-90%,splintering speed from 70minutes to 40 minutes.Sodium Lignosulphonate has been widely applied as ceramic additives/admixtures of Industry.
Stabilized emulsions in drilling fluidSodium Lignosulphonate series products could emulsify two liquids which are not compatible like oil and water, make them highly connected with each other. It shows a high adsorption affinity for a wide range of chemical substrates, like oil, fat and wax so lignosulphonate could work as emulsion stabilizers. Sodium Lignosulphonate, prominent among various stabilizing agents, have been used successfully for several years in both lime-base and brine-based fluids.
Dyestuff additiveSodium lignosulphonate as dispersant has good heating stability, lower staining ability, minimize foaming. Sodium lignosulphonate can betterclay workability, reduced need for die lubrication,life of wearing parts,free water also reduced energy consumption;quick drying ,increase greenth. reduced Baryum Carbonate need, even up to its elimination.
Leather tanningOne of the excellent property of sodium lignosulphonate used as tanning agent is irreversible suitability bonding of vegetable tannins. Lignosulphonate retarder has influence in the early development of strength with its main purpose of retarding. The cement slurry containing sodium lignosulphonate retarder is successfully used in oil industry with th advantages.e extra
Soil improvement agent & plant growth regulator on AgricultureSodium lignosulphonate as soil conditioner/soil improvement agent are often used to reduce shrinkage yet maintain after-forming mechanical strength (because reduced amounts of plastic clays are needed). Especially, for the chemical fertilizer granulation, could make the wet past into granulation under low pressure extrusion is used for the conversion of powders into granules.
Package,StoragePacking :There is plastic pellicle inside and is exteriorly packed with plastic woven bag with 25kgs as net weight per bag.
Storage :It shall be stored in a waterproof, rainproof place to avoid agglomeration. If there isagglomeration, smashing it or dissolving it will not affect the using effect.The product is harmless and does not deteriorate in long term storage. It's not a flammable and explosive substance
SHANDONG ALIVAN CHEMICAL TECHNOLOGY CO.,LTD.
- Company Name: SHANDONG ALIVAN CHEMICAL TECHNOLOGY CO.,LTD.
- Representative: duanyingchun
- Product/Service: Sodium Ligninsulphonate , Magnesium Sulfate , Ammonium Chloride , Copper Sulphate , Sorbitol , Calcium Formate
- Capital (Million US $): 3000000RMB
- Year Established: 2017
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 61% - 70%
- Total Annual Purchase Volume (Million US $): US$5 Million - US$10 Million
- No. of Production Lines: 3
- No. of R&D Staff: Fewer than 5 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: no
- Factory Size (Sq.meters): Below 1,000 square meters
- Factory Location: Industry Zone,Zouping,Binzhou City,Shandong Province,China
- Contact Person: Ms. JENIFER
- Tel: 86-543-4851519
Premium Related Products